Epoxy leveling Surface

product feature:

• This product is based on epoxy resin and polyamine hardener.
• This product is applied as an intermediate layer on the epoxy concrete primer and then the epoxy coating is applied as the final layer.
• Epoxy middle layer is used in various industries due to its flexibility, good hardness and high compressive strength in the floor of halls and warehouses.

Surface preparation:

• After vacuuming the surface and joints, apply a layer of epoxy concrete primer on the surface and joints with a capillary roller and brush.
• Clean primer impregnated surfaces with epoxy grout or epoxy surface modifier.

Method of application :

• Due to the importance of the mixing ratio of the components and its effect on the final quality of the product, mix the two components A and B together and mix for 3 minutes with a suitable mixer to obtain a uniform solution.
• Pour the prepared epoxy coating on the work surface and spread it evenly on the surface with a scraper.
• Due to the presence of small bubbles in the coating that occur during mixing, remove these bubbles using a bubble trap tool. This operation should be done 3 times at intervals of 20 minutes.
• Use studded shoes to move on the surface and bubble.

safety tips:

• In case of contact with skin and eyes, rinse immediately with plenty of water and seek medical advice.